WELCOME TO CHARLIE’S TATTOO SUPPLIES
NEW WEBSITE SAME QUALITY
These patches offer a clean, permanent attachment without sewing, making them a popular choice for many types of apparel.
Key Features
Backing: Heat-activated adhesive (thermoplastic) that melts and bonds to fibers when heat and pressure are applied.
Size: 14” x 8”
Durability: Strong bond on most medium- to heavyweight fabrics; wash-resistant when applied correctly. Not recommended for delicate or loosely woven fabrics without additional sewing.
Application Steps (using a heat press)
Preheat the garment: Lay the garment flat and press for 5–10 seconds to remove moisture and wrinkles.
Position the patch: Place the patch adhesive-side down on the fabric.
Cover: Use a Teflon sheet or thin cloth over the patch to protect the patch and garment.
Press: Apply heat and medium-to-firm pressure. Typical settings: 300–320°F (148–160°C) for 10–15 seconds. Times and temperatures vary by patch type and press; always follow the manufacturer’s recommendation.
Cool & finish: Allow the patch to cool slightly, then check adhesion. For extra security, sew around the edge, especially on items that will be stretched, washed frequently, or used on knit fabrics.
Tips & Considerations
Fabric compatibility: Works best on cotton, polyester, denim, and canvas. Avoid high-heat-sensitive materials like nylon, acetate, some leather, and coated fabrics unless specified safe.
Wash care: Turn garment inside out and wash in cold water with mild detergent. Tumble dry low or line dry. Reapply sewing if corners lift after repeated washing.
Iron alternative: A household iron can be used but provides less consistent pressure and heat than a heat press. Increase pressing time and apply steady pressure.
Professional finishing: For garments that undergo heavy wear or industrial laundering, a combination of heat-pressing and sewing is recommended.
At Charlie’s Tattoo Supplies, we carry a selection of ready-made and custom heat press patches. Ask in-store for patch inventory, custom orders, and the best settings for your garment.
These patches offer a clean, permanent attachment without sewing, making them a popular choice for many types of apparel.
Key Features
Backing: Heat-activated adhesive (thermoplastic) that melts and bonds to fibers when heat and pressure are applied.
Size: 14” x 8”
Durability: Strong bond on most medium- to heavyweight fabrics; wash-resistant when applied correctly. Not recommended for delicate or loosely woven fabrics without additional sewing.
Application Steps (using a heat press)
Preheat the garment: Lay the garment flat and press for 5–10 seconds to remove moisture and wrinkles.
Position the patch: Place the patch adhesive-side down on the fabric.
Cover: Use a Teflon sheet or thin cloth over the patch to protect the patch and garment.
Press: Apply heat and medium-to-firm pressure. Typical settings: 300–320°F (148–160°C) for 10–15 seconds. Times and temperatures vary by patch type and press; always follow the manufacturer’s recommendation.
Cool & finish: Allow the patch to cool slightly, then check adhesion. For extra security, sew around the edge, especially on items that will be stretched, washed frequently, or used on knit fabrics.
Tips & Considerations
Fabric compatibility: Works best on cotton, polyester, denim, and canvas. Avoid high-heat-sensitive materials like nylon, acetate, some leather, and coated fabrics unless specified safe.
Wash care: Turn garment inside out and wash in cold water with mild detergent. Tumble dry low or line dry. Reapply sewing if corners lift after repeated washing.
Iron alternative: A household iron can be used but provides less consistent pressure and heat than a heat press. Increase pressing time and apply steady pressure.
Professional finishing: For garments that undergo heavy wear or industrial laundering, a combination of heat-pressing and sewing is recommended.
At Charlie’s Tattoo Supplies, we carry a selection of ready-made and custom heat press patches. Ask in-store for patch inventory, custom orders, and the best settings for your garment.